Tilt doors have a high ventilation cross-section (up to 80%) for underground garages and a low lintel requirement of only 200 mm. A wicket door (escape route) can be integrated into the door leaf. Two designs are available for this door:
The standard version consists of steel rectangular profiles 30 x 15 mm with a distance of 100-120 mm. For versions with different aluminum perforated plates (optional), the perforated plates are riveted on from the outside.
Design aluminum profile frame: Consisting of an aluminum hollow profile frame, in which the individual profiles are screwed together. The surface of the profiles is anodised.
The standard version consists of square profiles 20 mm in a distance of 100-120 mm. For versions with different perforated plates (optional) the aluminum perforated plates are fixed from the inside with glazing beads between the aluminum profiles.
For both door leaf variants a surface coating in RAL/DB colors is possible at an extra charge.
Request a quote or question?
+49 781 28404-0